B300 Raised Edge Trim (3m)

The B300 is the largest Cure It raised edge trim, with a deep fascia for roof edges that sit higher on warm roof build-ups. It holds water on the roof along non-draining edges and is designed to pair with the A250 drip trim.

Key features

• Deep fascia raised edge trim
• Ideal for warm roof specifications
• Compatible with the A250 drip trim
• Made from GRP, with a matt high-adhesion side for bonding and a glossy side; always bond to the matt side.

Where it is used

Non-draining edges of warm roofs, where a deeper edge profile is needed.

Specification

Product code TRB300. GRP. 3m lengths as standard.

Installation note

Fix a single batten level with the top edge of the deck, run a continuous bead of Cure It Trim Adhesive along it, rub the trim into place and nail through the top of the trim into the decking, never through the front face. Where a ladder will regularly rest against the trim, reinforce it (double up the trim, add an extra layer of laminate and tissue, or fit a shaped timber batten into the ridge). Fix with 13mm galvanised clout nails or a stapler into the decking: at each end, the middle, then 100mm centres. Use Cure It Trim Adhesive (silicone or general-purpose mastic is not suitable). Bandage every joint between trim sections and between trim and decking. Always follow the current Cure It installation guide.

Compatibility

A250 drip trim. Corners: C1 and C2 (all B trims). C8B expansion closure (all B trims).